Wilo Pumps

Sort By:  
pic_WILO_GOLD_RS50
WILO GOLD RS50 (GOLD RS50)

For circulation of water in open and closed circuit domestic central heating and air-conditioning systems.

Specifications l Temperature range : -10° to +110°C l Ambient temperature : up to 40°C l Max. service pressure : 10 bar l Min. suction pressure : 1.5 m (5 feet) to prevent cavitation at +82°C; noise and give : 3 m (10 feet) adequate lubrication at +95°C to bearings : 10 m (133 feet) at +100°C l Antifreeze (Water + glycol): up to 50 %

45.00€
65.00€
pic_WILO_GOLD_50
WILO GOLD 50 (WILO GOLD 50)

Para a circulação de água em sistemas de aquecimento central e de ar condicionado de circuito aberto e fechado.

Especificações l Faixa de temperatura: -10 ° a + 110 ° C l temperatura ambiente: até 40 ° C l máx. pressão de serviço: 10 bar l min. pressão de sucção: 1,5 m (5 pés) para evitar a cavitação a + 82 ° C; barulho e dar: 3 m (10 pés) lubrificação adequada a + 95 ° C para rolamentos: 10 m (133 pés) a + 100 ° C l anticongelante (água + glicol): até 50%

50.00€
60.00€
WILO SMART A-25/4-130
WILO SMART A-25/4-130 (WILO SMART A-25/4-130)

Field of applications: All hot water heating systems, floor heating systems and air conditioning

User benefits • Filter and deblocking software for a reliable start • Rated energy efficiency class A • Simple to set up, quick to install • Flexible field of applications (+2°C to +95°C)

60.00€
70.00€
Wilo_ST_25-6_ECO-3P
WILO PUMP ST25/6 ECO-3 P (ST25/6 ECO-3 P)

Water lubricated pump especially designed for solar systems Anti-corrosive coating 3 speed operation options Liquid temperature range: from -10°C up to 110°C Maximum pressure: 10 bar Protection class: IP 44 Rated operating voltage: 230 V - 50 Hz Maximum volume flow: Q 2,5 m3/h Maximum delivery head: Η 6 m Nut connection: 1 1/2'' Length: 130 mm

110.00€
Yonos_pico_25-1-5-130
WILO YONOS PICO 25/1-5-130 (YONOS PICO 25/1-5-130)

Field of application: Heating/floorheating/airconditioning Performance range: 5 m to 3.5 m³/h Drive technology/EFF class: ECM / A Water temperatures at max. ambient temperature of +40°C: -10 °C to +95 °C

150.00€
346.00€
WILO YONOS PARA RS25/6
WILO YONOS PARA RS25/6 (YONOS PARA RS25/6)

Approved fluids: Heating water

Power: Max. delivery head (Hmax) 6,2 m (6 m model) Max. volume flow (Qmax) 3,3 m3/h Permitted field of application: Temperature range for applications in heating and air-conditioning systems, at max. ambient temperature. Electrical connection: Mains connection 1~230 V

170.00€
Pic_HEAD MOTOR TOP-S_30-7
WILO PUMP HEAD PART NO TOP-S/SD/SV30/7 RMOT - 1 ph (PUMP HEAD PART NO TOP-S/SD/SV30/7 RMOT - 1 ph)

REPLACEMENT HEAD FOR WILO TOP S/SD 7 PUMP - Can be used for hot-water heating systems of all kinds, industrial circulation systems, air-conditioning systems and closed cooling circuits. Maintenance-free glandless circulation pump with threaded or flange connection, preselectable speed stages for power adjustment.

Equipment and function Manual power adjustment with 3 speed stages Pumps with 1~ motor: P2 up to 90 W: Internal protection against unacceptably high winding temperatures P2 = 180 W: Full motor protection by thermal winding contacts in combination with tripping unit Pumps with 3~ motor:

220.00€
350.00€
TOP_S_30-7
WILO TOP S 30/7 -3 ph (TOP S 30/7 -3 ph)

Application: Hot-water heating systems of all kinds, industrial circulation systems, air-conditioning systems and closed cooling circuits.Special features/product advantages: Direction of rotation signal lamp for displaying the correct sense of rotation (only with 3~), Manual power adjustment with 3 speed stages, Pump housing with cataphoretic coating (KTL) protects against corrosion due to condensation formation

310.00€
410.00€
TOP_E_40-1-4
WILO TOP E 40/1-4 -1ph (TOP E 40/1-4 -1ph)
p> • up to 50% power saving compared with heating pumps without control • Automatic control function • Remote control via infrared interface (IR monitor) • Pump communication using plug technology that can be retrofitted without any problem Glandless circulation pump with flange connection and automatic capacity adjustment

Material: � Pump housing: cataphoretic coated cast iron, also available in red bronze, depending on the type � Impeller: plastic � Shaft: stainless steel � Bearing: metal-impregnated carbon

Hot-water heating systems of all kinds and industrial circulation systems 1 x 230 V 200, 60W Overall length: 220 mm DN: 40 mm Flange holes distances: 80 mm and 70 mm with universal hole

440.00€
870.00€
WILO STRATOS ECO-Z 25/1-5
WILO STRATOS ECO-Z 25/1-5 (WILO STRATOS ECO-Z 25/1-5)

This circulation pump is suitable only for drinking water. Domestic hot water circulation pump (glandless version) with minimum operating costs, for pipe installation. Used in domestic hot water circulation systems; fluids are drinking water and water for food companies in accordance with TrinkwV 2001 (Drinking Water Ordinance). Max. fluid temperature of +65 °C

With built-in electronic power control, differential-pressure controlled. • Equipped as standard with thermal insulation shell • Automatic setback operation • Either setpoint or speed adjustment with "red button" • Either variable or constant differential pressure control • Collective fault signal as potential-free contact • External OFF control input • 0-10V control input Blocking-current proof synchronous motor in accordance with ECM technology with maximum efficiency and high starting torque, including automatic deblocking function. Pump housing made of red brass, impeller made of Noryl, stainless steel shaft with resin-impregnated carbon friction bearings.

Can be used for all drinking water applications (+15 to +65°C) up to 20 German degrees of hardness. Materials Pump housing: Red brass (CC 499K) according to DIN 50930-6 in accordance with Drinking Water Ordinance Impeller: Polyphenylene oxide Pump shaft: Stainless steel Bearing: Carbon, synthetic resin impregnated

Approved fluids (other fluids on request) Max. volume flow: 2.5 m3/h Max. delivery head: 5.0 m

440.00€
540.00€
TOP_S_40-10
WILO TOP S 40/10 (TOP S 40/10)

Can be used for hot-water heating systems of all kinds, industrial circulation systems, air-conditioning systems and closed cooling circuits. Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment. Equipment and function • Manual power adjustment with 3 speed stages • Pump with 1~ motor 230V: • Cataphoretic-coated pump housing for optimal corrosion protection • Combination flange PN 6/PN 10 (with DN 40 to DN 65) • Thermal insulation shells for heating applications • Additional functions with retrofittable Protect Module C:

Materials Pump housing: Grey cast iron (EN-GJL-250) Impeller: Plastic (PP - 50% GF) Pump shaft: Stainless steel (X46Cr13) Bearing: Carbon, metal impregnated

Max. volume flow: 14 m3/h Max. delivery head: 4 m

560.00€
960.00€
WILO YONOS MAXO - D 25/0,5-7 (D 25/0,5-7)

High efficiency pump Wilo-Yonos MAXO electronically controlled, Glandless circulator, synchronous motor according to ECM technology and integrated power control for continuous differential pressure control. Can be used for all heating, ventilation and air-conditioning applications. Standard-equipped with: Preselectable control modes for optimum load adjustment: Δp-c (differential pressure constant), Δp-v (differential pressure variable) 3 speed stages (n = constant) LED for setting the setpoint and displaying error messages Electrical connection with the Wilo plug Fault lamp and contact for collective fault signal For flange-end pumps - flange versions: Standard version for pumps DN 32 to DN 65: PN 6/10 combination flange (PN 16 flange according to EN 1092-2) for PN 6 and PN 16 counter flanges Standard version for DN 80/DN 100 pumps: PN 6 flange (designed for PN 16 according to EN 1092-2) for PN 6 counter flange

565.00€
787.00€
WILO TOP-S50-4
WILO TOP S 50/4 - 3ph (WILO TOP S 50/4)

Can be used for hot-water heating systems of all kinds, industrial circulation systems, air-conditioning systems and closed cooling circuits. Maintenance-free glandless circulation pump with threaded or flange connection, pre-selectable speed stages for power adjustment.

Equipment and function Manual power adjustment with 3 speed stages Pumps with 3~ motor: P2 up to 90 W: internal protection against unacceptably high winding temperatures P2 ≥ 180 W: Full motor protection with thermal winding contacts in conjunction with tripping unit (optional: SK 602N/SK 622N)

Mains connection 3~, 400 V with optional switching plug Cataphoretic-coated pump housing for optimal corrosion protection PN 6/PN 10 combination flange (for DN 40 to DN 65)

570.00€
870.00€
WILO STRATOS 25/1-6
WILO STRATOS 25-1-6 (25/1-6)

Wilo-Stratos high-efficiency pump electronically controlled, Glandless circulation pump with minimum operating costs, for pipe installation. Can be used for all HVAC applications (-10 °C to +110 °C). With built-in electronic power control for constant/variable differential pressure. Standard-equipped thermal insulation shells.

One-button manual operation level as standard, for: Pump On/Off Selecting the control mode: dp-c (differential pressure constant ) dp-v (differential pressure variable) dp-T (differential pressure temperature-controlled) by means of IR-Monitor/IR-Module/IR-Stick, Modbus, BACnet, LON or Can Q-Limit to restrict the maximum volume flow (setting only via IR-Stick) Manual control mode (setting constant speed) Automatic setback operation (self-learning) Setpoint or speed adjustment

Graphical pump display with rotatable display horizontal and vertical module mounting, for display of: Operating status Control mode Differential pressure or rotation speed setpoint Fault and alarm signals Synchronous motor using ECM technology with very high efficiency and high starting torque, automatic deblocking function and built-in full motor protection. Fault signal light, potential-free collective fault signal, infrared interface for wireless communication with Wilo IR-Monitor/IR-Stick operating and service device. Plug-in slot for Wilo Stratos IF-modules with interfaces for building automation (BA) or dual pump management (accessories: IF-modules Stratos Modbus, BACnet, LON, CAN, PLR, Ext.Aus, Ext.Min, SBM, Ext.Aus/SBM or DP).

Pump housing made of cast iron with cataphoretic coating, impeller made of glass-fibre reinforced plastic, stainless steel shaft with metal impregnated carbon plain bearings. For flange-end pumps - flange versions: Standard version for pumps DN 32 to DN 65: Combination flange PN 6/10 (flange PN 16 acc. to EN 1092-2) for counter flanges PN 6 and PN 16 Standard version for pumps DN 80 / DN 100: Flange PN 6 (configured for PN 16 acc. to EN 1092-2) for counter flange PN 6 Special version for pumps DN 32 to DN 100: Flange PN 16 (acc. to EN 1092-2) for counter flange PN 16

640.00€
744.00€
TOP_Z_50-RG
WILO TOP Z 50-RG (Z 50-RG)

This circulator is suitable only for drinking water. Can be used for domestic hot water circulation systems in the industry and building services. Maintenance-free glandless circulator with threaded or flange connection, pre-selectable speed stages for power adjustment. Equipment and function Manual power adjustment with 3 speed stages Pumps with 1~ motor: P2 up to 90 W: internal protection against unacceptably high winding temperatures P2 ≥ 180 W: Full motor protection with thermal winding contacts in conjunction with tripping unit (optional: SK 602N/SK 622N) Pumps with 3~ motor: P2 up to 90 W: internal protection against unacceptably high winding temperatures P2 ≥ 180 W: Full motor protection with thermal winding contacts in conjunction with tripping unit (optional: SK 602N/SK 622N) Mains connection 3~, 230 V with optional switching plug Pump housing in red brass or grey cast iron (stainless steel depending on type) PN 6/PN 10 combination flange (for DN 40 to DN 65) Thermal insulation shells

1,720.00€
1,892.00€
Per Page      1 - 15 of 15
  • 1